There are some common ways to repair the old car's faults. In the long-term use of the car, there will inevitably be some small problems, small faults, let alone used cars. In particular, the tire and fuel consumption are large, and the brake system is prone to safety hazards. So, how to deal with these situations? Then I'll tell you the next car repair.

　　常見故障一:輪胎被異物刺破。

　　Common fault 1: the tire is punctured by foreign matters.

　　輪胎是容易磨損和損壞的地方。特別是在山路上行駛時總會有石子或釘子扎破輪胎，很多車主為了省事，到路邊的修理店維修時還會繼續趕路，其實這種方法只能權宜之計，高速行駛時會有很多安全隱患。建議業主找一家全職的修理廠進行內部修理，因為全職的修理廠會有專門的工具來拆卸輪胎，而且用專門設計的硫化機加熱修理會更安全。

　　Tires are easy to wear and damage. Especially when driving on the mountain road, there will always be stones or nails puncturing the tires. In order to save trouble, many car owners will continue to rush to the roadside repair shop for maintenance. In fact, this method can only be a temporary solution, and there will be many safety hazards when driving at high speed. It is recommended that the owner find a full-time repair shop for internal repair, because the full-time repair shop will have special tools to dismantle the tire, and it will be safer to heat the tire with a specially designed curing press for repair.

　　常見故障二:油耗大大增加。

　　Common fault 2: fuel consumption greatly increased.

　　經過一段時間的使用，許多車主會突然發現燃油消耗量增加了10%，這是令人費解的。事實上，燃料消耗的增加也表明車輛有潛在的故障。這是為了了解燃料消耗增加的原因，然后加以解決。有許多因素導致燃料消耗量的增加。例如，離合器打滑會造成發動機轉速損失，導致油耗飆升，需要更換離合器壓盤和驅動輪。

　　After a period of use, many car owners will suddenly find that the fuel consumption has increased by 10%, which is puzzling. In fact, the increase in fuel consumption also indicates a potential failure of the vehicle. This is to understand the reasons for the increase in fuel consumption, and then solve it. There are many factors that contribute to the increase in fuel consumption. For example, the slipping of clutch will cause the loss of engine speed and fuel consumption soaring, so the clutch pressure plate and driving wheel need to be replaced.

　　常見故障三:制動系統故障。

　　Common fault 3: brake system fault.

　　制動系統故障包括:制動踏板行程過大，制動動作緩慢，制動效率很低甚至丟失，制動距離增大。有三種方法可以排除此問題。連續按下剎車踏板，如踏板逐漸上升并有彈性感覺，但停一會兒后再按下踏板時仍很低，即是剎車系統內的空氣，此時應剎車系統進行排氣。單腳剎車不工作，但是連續踩幾個踏板的剎車效果很好，一般來說，剎車踏板的自由行程太大或者剎車間隙太大。調整踏板的自由行程，檢查剎車間隙，必要時修復剎車拆卸。如何判斷輪胎是否需要更換

　　The brake system faults include: the brake pedal stroke is too large, the brake action is slow, the brake efficiency is very low or even lost, and the brake distance is increased. There are three ways to eliminate this problem. Press the brake pedal continuously. If the pedal rises gradually and feels elastic, but it is still very low when pressing the pedal after a while, that is, the air in the brake system. At this time, the brake system should exhaust. The single foot brake does not work, but the brake effect of continuously pressing several pedals is very good. Generally speaking, the free travel of the brake pedal is too large or the brake clearance is too large. Adjust the free travel of the pedal, check the brake clearance, and repair the brake disassembly if necessary. How to judge whether the tire needs to be replaced

　　此外,汽車保養小貼士汽車各種各樣的小缺點,老板不應忽視,這是提醒你汽車的隱藏的缺點,及時解決或更換,不僅保護汽車的安全,而且還延長汽車的使用壽命。所以，請認真對待。

　　In addition, car maintenance tips: the boss should not ignore all kinds of small defects of the car. This is to remind you of the hidden defects of the car, and solve or replace them in time, not only to protect the safety of the car, but also to extend the service life of the car. So, please take it seriously.

　　你知道以上的汽車保養你的舊汽車常見故障的維修方法的具體內容,我相信你有進一步的了解,希望你能學習在未來的應用,如果你想知道更多的知識,請繼續關注我們。

　　You know the specific content of the above maintenance methods for common faults of your old car. I believe you have a further understanding. I hope you can learn the application in the future. If you want to know more, please continue to pay attention to us.